Showing posts with label Samsung Mobile Solution. Show all posts
Showing posts with label Samsung Mobile Solution. Show all posts
Sunday, August 24, 2014
Thursday, August 21, 2014
Tuesday, August 19, 2014
Sunday, August 17, 2014
How To Hard Reset Samsung S7562 Galaxy S Duos Using its Hardware Keys
When you need to perform a Hard Reset?
You can apply this operation in many cases, We will mention some of them here:
- After installing bad or unsupported application into your Samsung mobile phone which causes your phone to be frozen.
- Your Samsung mobile phone doesn't respond to any order after booting because of some software errors.
- Forgotten pattern lock in Samsung Android mobile phones.
- Forgotten user code.
- Forgotten phone code.
- Before or after installing new firmware updates into your device.
- You want to delete all your personal information from your device in case you want to sell it.
- Your Samsung mobile phone doesn't respond to any order after booting because of some software errors.
- Forgotten pattern lock in Samsung Android mobile phones.
- Forgotten user code.
- Forgotten phone code.
- Before or after installing new firmware updates into your device.
- You want to delete all your personal information from your device in case you want to sell it.
What to do before performing the Hard Reset?
- In case your Samsung mobile phone can connect to a computer then it is better to make a backup of your saved data using Samsung kies software.
- Check that your phone's battery has enough charging, Otherwise you should charge it.
- Check that your phone's battery has enough charging, Otherwise you should charge it.
Samsung S7562 Galaxy S Duos Hard Reset Steps:
- Make sure that your Samsung S7562 Galaxy S Duos is Off, And has no SIM or Memory cards are inside.
- Take out its battery for 10 seconds, Then put it in again.
- Press and hold Volume Up + Volume Down + Home Keys, Then press Power.
- Keep pressing the above keys until Samsung logo appears,Then release all keys.
- Wait until you are into Factory reset / System Recovery menu.
- Use Volume Down key to scroll down and select Wipe Data / Factory Reset option.
- Use Power button to confirm the operation.
- You need to use the Volume Down key again to select "Yes -- delete all user data"
- Use Power button to confirm the operation one more time.
- After performing the hard reset, Select Reboot System Now option, And confirm it using Power button.
- Now the phone will reboots, Wait for it to be fully on and then you can start using it.
Notice: The Hard Reset / Factory Reset operation will delete anything that are saved in your phone's internal memory, So make a backup of your data in case you can access them.
How To Update Samsung GT-I9235 Galaxy Golden LTE Firmware Version - Odin3 Firmware Package
The Samsung Galaxy Golden GT-I9235 was released in November 2013, It has Dual Touch Screens, The main one is 480 x 800 pixels, 3.7 inches, Super AMOLED capacitive touchscreen, 16M colors, And the external one is Super AMOLED capacitive touchscreen, 16M colors, 480 x 800 pixels, 3.5 inches.
The Galaxy Golden runs Android 4.2.2 Jelly Bean OS, It is powered by Qualcomm MSM8930 Snapdragon 400, Dual-Core 1.7 GHz Krait CPU, And Adreno 305 GPU, The internal memory size is 16 GB, And 1.5 GB of RAM memory, Like any other new Samsung Android Smartphone, This one has WiFi, Bluetooth, GPS support, The Galaxy Golden has two cameras, The main one is 8MP 3264 x 2448 pixels, With a lot of features, And front 1.9MP camera.
In this Guide we will explain the right way to update the firmware version of the Galaxy Golden GT-I9235, The firmware package that we will use here is an Official Samsung firmware package, It is Odin3 firmware package, And we will use a full firmware package, It contains four files, Bootloader, Modem, Platform (PDA), And CSC file, In addition we will use the PIT file of Samsung Galaxy Golden GT-I9235 (signed_KS02LTE_MEA_16G_V2_131009.pit).
The Galaxy Golden runs Android 4.2.2 Jelly Bean OS, It is powered by Qualcomm MSM8930 Snapdragon 400, Dual-Core 1.7 GHz Krait CPU, And Adreno 305 GPU, The internal memory size is 16 GB, And 1.5 GB of RAM memory, Like any other new Samsung Android Smartphone, This one has WiFi, Bluetooth, GPS support, The Galaxy Golden has two cameras, The main one is 8MP 3264 x 2448 pixels, With a lot of features, And front 1.9MP camera.
In this Guide we will explain the right way to update the firmware version of the Galaxy Golden GT-I9235, The firmware package that we will use here is an Official Samsung firmware package, It is Odin3 firmware package, And we will use a full firmware package, It contains four files, Bootloader, Modem, Platform (PDA), And CSC file, In addition we will use the PIT file of Samsung Galaxy Golden GT-I9235 (signed_KS02LTE_MEA_16G_V2_131009.pit).
Preparation Steps:
1- Check the current firmware of your mobile, You can check it from Setting > About Phone, Or you can use this easy code *#1234#
2- It is a good idea to write down your device current firmware version, It will be useful later, In case something goes wrong.
3- Charge your Galaxy Golden's battery to be at least at the 90% charge level.
4- Updating your mobile's firmware will delete everything from your device internal memory, So read this Guide to learn how you can make a backup of your important data (SMS, Contacts, Notes...etc).
5- In case you have an external memory card inserted into your Galaxy Golden, Then remove it.
6- Download the Samsung Galaxy Golden USB Driver, And install it, Then restart your computer.
7- Download Odin3 program (Original Android Flasher), Extract to your computer's desktop.
8- Download The Firmware package (GT-I9235), Select the version you want to install it on your Smartphone.
9- Extract the firmware package to a known location on your computer.
Odin3 Settings:
1- Double click on Odin3.exe to run it.
2- These settings must be checked: Auto Reboot, F.Reset Time.
3- If you have the PIT file of your Galaxy Golden GT-I9235, Then check: Re-Partition
Full Firmware Files Selection:
- Click on PIT button and select: signed_KS02LTE_MEA_16G_V2_131009.pit
- Click on BL button and select: BOOTLOADER_I9235xxxxxxx_...REV01_user_low_ship.tar
- Click on AP button and select: PLATFORM_I9235xxxxxxx_...REV01_user_low_ship.tar
- Click on CP button and select: MODEM_I9235xxxxxxx_...REV01_user_low_ship.tar
- Click on CSC button and select: CSC_Oxx_I9235Oxxxxxx_...REV01_user_low_ship.tar
- Click on BL button and select: BOOTLOADER_I9235xxxxxxx_...REV01_user_low_ship.tar
- Click on AP button and select: PLATFORM_I9235xxxxxxx_...REV01_user_low_ship.tar
- Click on CP button and select: MODEM_I9235xxxxxxx_...REV01_user_low_ship.tar
- Click on CSC button and select: CSC_Oxx_I9235Oxxxxxx_...REV01_user_low_ship.tar
Putting your GT-I9235 Galaxy Golden into Download Mode:
At this step you have to turn off your Samsung Galaxy Golden, Take out its battery and SIM card, Then read this Guide to put it in Download Mode, To be able to install the new firmware into your device you should put it into this mode.
Installing the new Firmware on your Samsung GT-I9235 Galaxy Golden Smartphone:
1- After you put your Smartphone into Download Mode, Use the USB cable to connect it to your computer.
2- You have to wait until Windows detects the device and installs any needed drivers.
3- Look at Odin3 program's window, If the program detects your connected device correctly, You should see its COM Port number (0:[COMxx]).
4- You are ready to install the new firmware files into your Samsung GT-I9235 Galaxy Golden, Click Start button to begin.
5- After you click the Start button, Odin3 program will start to install the selected firmware files on the connected device.
6- Odin3 program will restart your Galaxy Golden automatically after installing the firmware.
7- Wait until your Smartphone is restarted.
8- Look again at Odin3 program's window, If you see PASS! Word in green, Then the update was done successfully.
9- Disconnect your mobile.
10- When the mobile is fully on, Check the new installed firmware version.
11- Now you are ready to use the device, So reinsert the SIM and Memory cards, Restore your backup, And customize it.
Notices:
Notices:
- You can update your device firmware version without using any PIT file, So use the PIT file only if you need to fix your device partitions.
- When you get one big file inside the firmware package, Then it should be selected as a AP file only, And do not check Re-Partition option or use PIT file at all.
Samsung S3850 Corby II Firmware Using Multiloader Program and USB Cable
Are you looking for a Guide to teach you how you can Update your Samsung Corby II firmware? If you are so then you can smile, This Guide is yours.
This Guide will try to give you everything you need from Multiloader flasher to the Firmware files, And for sure the complete step by step process, So if your are ready let's start.
- Put the phone's battery back but do not turn it on.
- Connect USB cable to phone and PC, Then wait until Windows detects it and install the needed drivers for it.
This Guide will try to give you everything you need from Multiloader flasher to the Firmware files, And for sure the complete step by step process, So if your are ready let's start.
Useful Tips:
- Backup any data you have saved on the phone in case you don't want to lose them, Anything saved on the memory card will not be touched at all.
- Charge the phone's battery to be at least at 90% of charging level.
- Use stable PC for updating your phone, And never use any USB HUB to connect your phone to.
- Read all the steps first, And when you understand them all you can start applying them one by one.
Tools And Files You Need:
Tools And Files You Need:
- Samsung S3850 Corby II Firmware Package: Download it and extract it.
- Multiloader program: Download it and extract it too.
- Samsung S3850 Corby II Original USB Drivers: After downloading the drivers you have to install it on your PC, Then restart the PC.
- USB Cable: You can use Samsung S3850 Original USB cable, Or any suitable one.
Samsung S3850 Firmware Update Steps:
- Turn off your Samsung S3850 and take out its battery, SIM Card, And MMC card too.
- Turn off your Samsung S3850 and take out its battery, SIM Card, And MMC card too.
- Run Multiloader.exe program.
- Select BRCM2133 as CPU type.
- In case you want or need to flash Boot files too, Then check Full Download option, Otherwise leave it unchecked.
- Now you have to select the following files from the extracted firmware folder:
Click Boot button to select the complete Boot files folder.
Click Boot button to select the complete Boot files folder.
Click Apps button to select: apps_compressed.bin
Click Rsrc1 button to select: Rsrc_S3850_xxxx_xxxxxx_Common.rc1
Click Rsrc2 button to select: Rsrc2_S3850(Low).rc2
Click Factory FS button to select: FactoryFs_S3850_xxxx_xxxxxx_Common.ffs
Click CSC button to select: CSC_S3850_xxxx_xxxxxx_Common_Oxx.csc
Click SHP APP button to select: ShpApp.app
- Put the phone's battery back but do not turn it on.
- Put your phone into Download Mode:
Press and Hold Volume Down Key + Send Key then press Power Key.
- Connect USB cable to phone and PC, Then wait until Windows detects it and install the needed drivers for it.
- Click on Search Port button, And Multiloader program will detects the phone's Com port number.
- Now you can start the update by clicking Download button.
- Multiloader program will update your phone and reboots it after that.
- Disconnect the USB cable from phone.
- When your phone is fully on, Do full reset using this code *2767*3855#
- Wait for your phone again, And after it reboots you can start using it with the new firmware version.
Important Notice: No need to flash Boot files unless you must do so, In some cases the phone will not work normally if you did not flash them, So first try to flash only Firmware files.
Subscribe to:
Posts (Atom)